230V AC Surge Protection Device for Residential Use, 20kA In device

• Customization: Available
• Type: Power Source Arrester
• Structure: Valve Type Arrester
• Model NO.: TMSPD1
• Installation: Parallel Arrester
• Application: AC/DC System
• Size: Small
• Operation Voltage: Low Voltage
• Shape: Cuboid
• Material: ZnO
• Certification: ISO9001
• Brand: Timelec
• Uc: 230V
• In: 20kA
• Imax: 40kA
• Up: 1.5kV
• IEC: IEC61643-11
• IP: IP20
• Protection: Class II, T2
• Transport Package: Carton Box
• Specification: 36*69*91mm
• Trademark: Timelec, OEM / Private Label brands
• Origin: China
• HS Code: 853620
• Production Capacity: 1000000
• Package Size: 4.00cm * 9.30cm * 7.50cm
• Package Gross Weight: 0.300kg

Product Description

Product Description

Our Surge Protective Devices are expertly crafted to shield against the menacing threat of transient surge conditions. In the face of formidable surge events, like the fierce strike of lightning, which can unleash hundreds of thousands of volts, these devices stand as vigilant guardians against sudden or sporadic equipment failure. While lightning and utility power discrepancies are responsible for just 20% of transient surges, an astounding 80% emanate from within, causing frequent smaller surges that can gradually erode the performance of delicate electronic equipment within your facility.

Products features
1. Advanced 1P+N phase protection suitable for both AC/Dc systems

2. Ingeniously designed pluggable module for effortless installation and seamless maintenance

3. Exceptional high discharge capacity paired with a rapid response system

4. Dual thermal disconnection devices ensure superior reliability and protection

5. Intuitive green window indicator alters in case of faults and offers simultaneous remote alarm control

A power surge represents a sudden overvoltage event capable of inflicting damage to electrical devices. It is often a leading contributor to the deterioration of electrical equipment. Such surges possess the potential to harm and shorten the operational life of:

• Heating and Air Conditioning Systems
• Washers and Dryers
• Water Heaters
• Ranges & Refrigerators
• Lighting
• Entertainment Systems

As per the National Electrical Manufacturers Association, the typical home boasts $15,000 worth of equipment vulnerable to surge-induced damage.

Common Causes of Surge:
A significant 80% of surges are attributed to internal sources:

Internal Sources:

• The cycling on/off of large appliances
• Compromised wiring or loose connections
• Overloaded circuits, short circuits, or ground faults
• Power recovery events

External Sources:

• Lightning strikes
• Damage to power lines
• Switching within utility power grids

NEW 2020 National Electrical Code Requirements
For all new and renovated residences, compliance mandates the installation of Listed and Approved Type 1 or Type 2 Surge Protective Devices.

Type 1:
A permanently connected Surge Protective Device that safeguards against both external and internal surges. Versatile installation inside or outside the home.

Type 2:
Permanently connected Surge Protective Device, strategically positioned in or adjacent to the breaker box, offering protection against internal and external surges alike.

Type 3:
Provides additional point-of-use protection. Must be used alongside Type 1 or Type 2 SPD to fulfill 2020 code requirements.

For optimal protection, employ a combination of Type 1, 2, and 3 SPDs.

Product Parameters

Product category	Surge protection
Product type	SURGE PROTECTIVE DEVICE
Product model	HLSPD,SPD,TMSPD2
Unique selling proposition	·TMSPD1 SPD are suit for IT,TT,TN-C,TN-S,TN-C-S and low-voltage AC power distribution system, protect both direct and indirect lighting impulse and other transient over voltage. ·TMSPD1 surge protection device have high energy MOV chip, fast response speed. ·Products comply with IEC61643-1.2005, IEC61643-11.2011 standard.
Technical data	Type of SPD according to EN 61643-11	Type 2
	SPD according to IEC 61643-1	Class II
	Nominal a.c voltage( Un)	230V
	Max continuous operating a.c voltage (Uc)	275/320/385/440V
	Nominal discharge current (In 8/20|jS)	10/20KA
	Max. discharge current (Imax 8/20pS)	20/40KA
	Voltage protection level (Up)	<1.3/1.4/1.5/1.8/2.2KV
	Response time (tA)	<25ns
	Operating temperature range (Tu)	-40°C +80°C
	Operating state/fault indication	Green/red
	Cross-section area (min)	4mm²
	Cross-section area (Max)	16mm²
	For mounting on	35mm DIN rail acc to EN60715
	Degree of protection	IP20
	Terminal screw torque	2.5N·m
	Approvals	TUV

 

Installation Instructions

Selection of SPD:
For any power distribution system, defining the right lightning protection system is essential. Selecting an SPD is crucial to safeguarding an electrical installation within a building. The main characteristics to look out for include:

• SPD
  • quantity of SPD
  • type
  • Consider the level of exposure to determine the SPD's maximum discharge current, Imax.
• Short circuit protection device
  • maximum discharge current Imax;
  • Be aware of the short-circuit current, Isc, at the installation point.

The additional characteristics for selecting an SPD are pre-established for any electrical installation.

• number of poles in SPD;
• voltage protection level Up;
• operating voltage Uc.

This sub-section Design of the Electrical Installation Protection System This section provides an in-depth exploration of the criteria necessary for selecting the appropriate protection system. It considers the specific characteristics of the installation, the equipment that requires protection, and the surrounding environment.

Location and Types of SPD:


Connection of SPD:
SPD connections to the loads should be minimized to ensure a low voltage protection level (installed Up) at the terminals of the protected equipment.

The total SPD connection length to both the network and the earth terminal block should be kept under 50 cm for optimal performance.

SPD in plastic enclosure SPD in metal enclosure

 

RED: Replace
As soon as the indicator turns RED, it's imperative to replace the product to maintain protection.